- Created by Scott Cantor, last modified on May 24, 2023
You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 2 Next »
Current File(s): conf/authn/password-authn-config.xml, conf/ldap.properties, conf/authn/authn.properties
Format: Native Spring, Properties
Overview
The LDAPCredentialValidator for the password authentication login flow uses native LDAP libraries for password-based authentication instead of using a JAAS module. The primary advantages are slightly better performance and more control over the process, such as the ability to extract detailed account status information from the directory during a login. One disadvantage is that JAAS configurations may be reloaded each time they're used, while the native configuration is static.
General Configuration
Configuring LDAP as a back-end relies on beans internally that are configured using ldap.properties (defined separately from other properties because they are sometimes shared for LDAPConnector configuration).
The properties in ldap.properties do most of the work out of the box. Adding additional beans may be needed in very advanced cases where a higher degree of control is required, and can be placed within authn/password-authn-config.xml.
The properties act as global defaults that can be overridden on specific instances of beans inheriting from shibboleth.LDAPValidator defined in authn/password-authn-config.xml in the shibboleth.authn.Password.Validators bean.
In the simple case of LDAP used alone:
Defining use of LDAP in password-authn-config.xml
<util:list id="shibboleth.authn.Password.Validators"> <!-- Default bean uses the settings defined in ldap.properties --> <ref bean="shibboleth.LDAPValidator" /> </util:list>
It's possible to directly configure the various settings within the validator bean instead of or in addition to relying on the defaults. Typically this involves injecting a bean based on shibboleth.LDAPAuthenticationFactory into the validator bean’s authenticator
property. This is a large factory class of type net.shibboleth.idp.authn.config.LDAPAuthenticationFactoryBean that includes most common LDAP settings.
As an example, you could chain together multiple LDAP servers (rather than hoping the client library will do it for you) like this:
Chaining LDAP validators
<!-- These use the settings defined in ldap.properties except the ones overridden here. --> <util:list id="shibboleth.authn.Password.Validators"> <bean p:id="ldap1" parent="shibboleth.LDAPValidator"> <property name="authenticator"> <bean parent="shibboleth.LDAPAuthenticationFactory" p:ldapUrl="ldaps://ldap1.example.org" /> </property> </bean> <bean p:id="ldap2" parent="shibboleth.LDAPValidator"> <property name="authenticator"> <bean parent="shibboleth.LDAPAuthenticationFactory" p:ldapUrl="ldaps://ldap2.example.org" /> </property> </bean> </util:list>
The following sections describe how to configure a single instance of an LDAP CredentialValidator.
Authenticator Configuration
The idp.authn.LDAP.authenticator property controls the workflow for how authentication occurs against the LDAP directory for most “simple” cases by automatically configuring a number of underlying objects based on a set of built-in “authenticator types” supported by the ldaptive library.
anonSearchAuthenticator | Performs an anonymous search for the user's DN |
bindSearchAuthenticator | Binds with a configured DN as a service account, then searches for the user's DN |
directAuthenticator | User DNs are of a known format. i.e. CN=user_name,ou=accounts,dc=domain,dc=edu. No DN search is performed. |
adAuthenticator | Configuration that leverages the AD specific @domain.com format. No DN search is performed since AD supports binding directly with that user name. |
Depending on the choice above, various other properties must be set (see the reference section below).
Connection Configuration
Use the following properties to configure basic connection information for the LDAP directory:
idp.authn.LDAP.ldapURL
idp.authn.LDAP.useStartTLS
idp.authn.LDAP.connectTimeout
A connection pool is used, and there are several properties used to configure pool behavior (see the reference below).
SSL Configuration
If StartTLS or SSL are used, a source of trust anchors must be configured to control certificate validation, using the idp.authn.LDAP.sslConfig property:
certificateTrust | Uses the idp.authn.LDAP.trustCertificates property to load a resource containing the trust anchors (such as a file of PEM-format certificates) |
keyStoreTrust | Uses the idp.authn.LDAP.trustStore property to load a keystore containing the trust anchors |
jvmTrust | Uses the default JVM trust anchors (the JVM-wide "cacerts" file) |
disabled | Does not allow SSL or startTLS connections. |
We have tentative plans to deprecate the “jvmTrust” option, which has already been removed from the attribute resolution side of the software, as it is bad practice and has been a source of serious security flaws.
Reference
A number of properties are found in ldap.properties to configure LDAP authentication global defaults. Most of the time, this is sufficient to deal with most configurations without having to delve into modifying any beans, unless you're trying to chain together separately configured back-ends.
Note that the big "override everything" hook tends to be the idp.authn.LDAP.authenticator property, as most of the other properties auto-configure specific aspects of one of the built-in Authenticator beans.
Property | Type | Default | Function |
---|---|---|---|
idp.authn.LDAP.authenticator | Enumeration | anonSearchAuthenticator | Controls the workflow for how authentication occurs against the LDAP, one of: anonSearchAuthenticator, bindSearchAuthenticator, directAuthenticator, adAuthenticator |
idp.authn.LDAP.ldapURL | LDAP URI |
| Connection URI for LDAP directory. |
idp.authn.LDAP.useStartTLS | Boolean | true | Whether StartTLS should be used after connecting with LDAP alone. |
idp.authn.LDAP.connectTimeout | Duration | PT3S | Time to wait for the TCP connection to occur. |
idp.authn.LDAP.responseTimeout | Duration | PT3S | Time to wait for an LDAP response message. (Applies to every request.) |
idp.authn.LDAP.connectionStrategy | Enumeration | ACTIVE_PASSIVE | Connection strategy to use when multiple URLs are supplied, one of ACTIVE_PASSIVE, ROUND_ROBIN, RANDOM |
idp.authn.LDAP.sslConfig | Enumeration | certificateTrust | How to establish trust in the server's TLS certificate, one of: jvmTrust, certificateTrust, or keyStoreTrust |
idp.authn.LDAP.trustCertificates | Resource path |
| A resource to load trust anchors from, usually a local file in %{idp.home}/credentials |
idp.authn.LDAP.trustStore | Resource path |
| A resource to load a Java keystore containing trust anchors, usually a local file in %{idp.home}/credentials |
idp.authn.LDAP.returnAttributes | Comma-sep'd Strings |
| List of attributes to request during authentication |
idp.authn.LDAP.baseDN | String |
| Base DN to search against, used by anonSearchAuthenticator, bindSearchAuthenticator |
idp.authn.LDAP.subtreeSearch | Boolean | false | Whether to search recursively, used by anonSearchAuthenticator, bindSearchAuthenticator |
idp.authn.LDAP.userFilter | String |
| LDAP search filter, used by anonSearchAuthenticator, bindSearchAuthenticator |
idp.authn.LDAP.bindDN | String |
| DN to bind with during search, used by bindSearchAuthenticator |
idp.authn.LDAP.bindDNCredential | String |
| Password to bind with during search, used by bindSearchAuthenticator, usually set via %{idp.home}/credentials/secrets.properties |
idp.authn.LDAP.dnFormat | String |
| A formatting string to generate the user DNs to authenticate, used by directAuthenticator, adAuthenticator |
idp.authn.LDAP.resolveEntryOnFailure | Boolean | false | Whether the user's LDAP entry should be returned in the authentication response even when the user bind fails. |
idp.authn.LDAP.resolveEntryWithBindDN | Boolean | false | Whether the user's LDAP entry should be resolved with the bindDN credentials rather than as the authenticated user. |
idp.authn.LDAP.usePasswordPolicy | Boolean | false | Whether to use the Password Policy Control. |
idp.authn.LDAP.usePasswordExpiration | Boolean | false | Whether to use the Password Expired Control. |
idp.authn.LDAP.activeDirectory | Boolean | false | If you are using Active Directory, this switch will attempt to use the account states defined by AD. Note that this flag is unnecessary if you are using the 'adAuthenticator'. It is meant to be specified with one of the other authenticator types. |
idp.authn.LDAP.freeIPADirectory | Boolean | false | If you are using the FreeIPA LDAP, this switch will attempt to use the account states defined by that product. |
idp.authn.LDAP.eDirectory | Boolean | false | If you are using the EDirectory LDAP, this switch will attempt to use the account states defined by that product. |
idp.authn.LDAP.disablePooling | Boolean | false | Whether connection pools should be used for LDAP connections used for authentication. |
idp.pool.LDAP.minSize | Integer | 3 | Minimum LDAP connection pool size |
idp.pool.LDAP.maxSize | Integer | 10 | Maximum LDAP connection pool size |
idp.pool.LDAP.validateOnCheckout | Boolean | false | Whether to validate connections when checking them out of the pool |
idp.pool.LDAP.validatePeriodically | Boolean | true | Whether to validate connections in the background |
idp.pool.LDAP.validatePeriod | Duration | PT5M | Duration between validation, if idp.pool.LDAP.validatePeriodically is true |
idp.pool.LDAP.validateDN | String |
| DN to search with the validateFilter, default is the rootDSE |
idp.pool.LDAP.validateFilter | String | (objectClass=*) | Search filter to execute in order to validate a pooled connection |
idp.pool.LDAP.prunePeriod | Duration | PT5M | Duration between looking for idle connections to reduce the pool back to its minimum size |
idp.pool.LDAP.idleTime | Duration | PT10M | Duration connections must be idle to be eligible for pruning |
idp.pool.LDAP.blockWaitTime | Duration | PT3S | Duration to wait for a free connection in the pool |
idp.authn.LDAP.bindPoolPassivator | Enumeration | none | Controls how connections in the bind pool are passivated. Connections in the bind pool may be in an authenticated state that will not allow validation searches to succeed. This property controls how bind connections are placed back into the pool. If your directory requires searches to be performed by the idp.authn.LDAP.bindDN or anonymously, this property controls that behavior. one of: none, bind, anonymousBind. |
Properties can be used to configure all of the built-in beans used for this feature, so the only bean of relevance is below.
Bean ID | Type | Function |
---|---|---|
shibboleth.LDAPAuthenticationFactory | Factory bean parent for defining new instances of the org.ldaptive.auth.Authenticator class if required |
Advanced Features
Note that for some advanced use cases, it may be necessary to dig deeply into the Ldaptive documentation and wire up custom objects using, or based on beans in the older V3 version of authn/ldap-authn-config.xml, ultimately installing an instance of org.ldaptive.auth.Authenticator into the "authenticator" property of a particular LDAPCredentialValidator bean. Most of the flexibility comes from all the various types of objects that can be injected into instances of the Authenticator class.
LDAP attributes are returned as part of the authentication process and exposed in the LDAPResponseContext.
Property | Sample | Result |
---|---|---|
idp.authn.LDAP.returnAttributes | uid, eduPersonAffiliation | Returns the uid and eduPersonAffiliation attributes. |
* | Returns all user attributes on the entry. | |
*,+ | Returns all user and operational attributes on the entry. | |
1.1 | No attribute returned. No search performed. |
By default, attributes will be searched for using the same connection the user authenticated on. Therefore the user must have read on any attributes for those to be returned.
If you need access to attributes that user does not have read access to, then you must configure a connection pool that is authorized to read that data. The following configuration demonstrates how to add a new connection pool for that purpose.
Spring Configuration
<!-- Modify the authenticator to use the entry resolver --> <bean name="anonSearchAuthenticator" class="org.ldaptive.auth.Authenticator" p:entryResolver-ref="bindSearchEntryResolver"> ... <!-- Add an entry resolver to read attributes --> <bean id="bindSearchEntryResolver" class="org.ldaptive.auth.PooledSearchEntryResolver" p:connectionFactory-ref="entryResolverPooledConnectionFactory" /> <bean id="entryResolverPooledConnectionFactory" class="org.ldaptive.pool.PooledConnectionFactory" p:connectionPool-ref="entryResolverConnectionPool" /> <bean id="entryResolverConnectionPool" class="org.ldaptive.pool.BlockingConnectionPool" parent="connectionPool" p:connectionFactory-ref="entryResolverConnectionFactory" p:name="entry-resolver-pool" /> <bean id="entryResolverConnectionFactory" class="org.ldaptive.DefaultConnectionFactory" p:connectionConfig-ref="entryResolverConnectionConfig" /> <bean id="entryResolverConnectionConfig" parent="connectionConfig" p:connectionInitializer-ref="entryResolverConnectionInitializer" /> <bean id="entryResolverConnectionInitializer" class="org.ldaptive.BindConnectionInitializer" p:bindDn="%{idp.authn.LDAP.entryResolver.bindDN}"> <property name="bindCredential"> <bean class="org.ldaptive.Credential"> <constructor-arg value="%{idp.authn.LDAP.entryResolver.bindDNCredential}" /> </bean> </property> </bean>
Add the idp.authn.LDAP.entryResolver.bindDN and idp.authn.LDAP.entryResolver.bindDNCredential properties to conf/ldap.properties and credentials/secrets.properties respectively. Then set idp.authn.LDAP.authenticator to anonSearchAuthenticator. to complete the configuration.
Note: if you're using the bindSearchAuthenticator and those credentials can be reused for entry resolution, then this configuration can be shortened by wiring the bindPooledConnectionFactory to the entry resolver.
Single Directory with Multiple Branches
Extensible Matching
If your directory supports extensible matching, this is the easiest way to find users that are distributed over multiple branches.
Property | Value | Result |
---|---|---|
idp.authn.LDAP.userFilter | (&(|(ou:dn:=people)(ou:dn:=guests))(uid={user})) | Returns the entry that matches uid on either the people or guests branch. |
idp.authn.LDAP.baseDN | dc=example,dc=org | The branch containing both ou=people and ou=guests. |
idp.authn.LDAP.subtreeSearch | true | Enable subtree searching on the dc=example,dc=org branch. |
Aggregate DN Resolver
This authenticator combines the results of multiple DN resolvers.
Spring Configuration
<!-- Connection Configuration --> <bean id="connectionConfig" class="org.ldaptive.ConnectionConfig" abstract="true" p:ldapUrl="%{idp.authn.LDAP.ldapURL}" p:useStartTLS="%{idp.authn.LDAP.useStartTLS:true}" p:useSSL="%{idp.authn.LDAP.useSSL:false}" p:connectTimeoutDuration="%{idp.authn.LDAP.connectTimeout:PT3S}" p:responseTimeoutDuration="%{idp.authn.LDAP.responseTimeout:PT3S}" p:sslConfig-ref="sslConfig" /> <alias name="%{idp.authn.LDAP.sslConfig:certificateTrust}" alias="sslConfig" /> <bean id="jvmTrust" class="org.ldaptive.ssl.SslConfig" /> <bean id="certificateTrust" class="org.ldaptive.ssl.SslConfig"> <property name="credentialConfig"> <bean parent="shibboleth.X509ResourceCredentialConfig" p:trustCertificates="%{idp.authn.LDAP.trustCertificates:undefined}" /> </property> </bean> <bean id="keyStoreTrust" class="org.ldaptive.ssl.SslConfig"> <property name="credentialConfig"> <bean parent="shibboleth.KeystoreResourceCredentialConfig" p:truststore="%{idp.authn.LDAP.trustStore:undefined}" /> </property> </bean> <!-- Pool Configuration --> <bean id="connectionPool" class="org.ldaptive.pool.BlockingConnectionPool" abstract="true" p:blockWaitTimeDuration="%{idp.pool.LDAP.blockWaitTime:PT3S}" p:poolConfig-ref="poolConfig" p:pruneStrategy-ref="pruneStrategy" p:validator-ref="searchValidator" p:failFastInitialize="%{idp.pool.LDAP.failFastInitialize:false}" /> <bean id="poolConfig" class="org.ldaptive.pool.PoolConfig" p:minPoolSize="%{idp.pool.LDAP.minSize:3}" p:maxPoolSize="%{idp.pool.LDAP.maxSize:10}" p:validateOnCheckOut="%{idp.pool.LDAP.validateOnCheckout:false}" p:validatePeriodically="%{idp.pool.LDAP.validatePeriodically:true}" p:validatePeriodDuration="%{idp.pool.LDAP.validatePeriod:PT5M}" /> <bean id="pruneStrategy" class="org.ldaptive.pool.IdlePruneStrategy" p:prunePeriodDuration="%{idp.pool.LDAP.prunePeriod:PT5M}" p:idleTimeDuration="%{idp.pool.LDAP.idleTime:PT10M}" /> <bean id="searchValidator" class="org.ldaptive.pool.SearchValidator" /> <!-- Authentication handler --> <bean id="authHandler" class="org.ldaptive.auth.PooledBindAuthenticationHandler" p:connectionFactory-ref="bindPooledConnectionFactory" /> <bean id="bindPooledConnectionFactory" class="org.ldaptive.pool.PooledConnectionFactory" p:connectionPool-ref="bindConnectionPool" /> <bean id="bindConnectionPool" class="org.ldaptive.pool.BlockingConnectionPool" parent="connectionPool" p:connectionFactory-ref="bindConnectionFactory" p:name="bind-pool" /> <bean id="bindConnectionFactory" class="org.ldaptive.DefaultConnectionFactory" p:connectionConfig-ref="bindConnectionConfig" /> <bean id="bindConnectionConfig" parent="connectionConfig" /> <!-- Anonymous Search Configuration --> <bean name="anonSearchAuthenticator" class="org.ldaptive.auth.Authenticator" p:resolveEntryOnFailure="%{idp.authn.LDAP.resolveEntryOnFailure:false}"> <constructor-arg index="0" ref="anonSearchDnResolver" /> <constructor-arg index="1" ref="authHandler" /> </bean> <bean id="anonSearchDnResolver" class="net.shibboleth.idp.authn.PooledTemplateSearchDnResolver" p:baseDn="#{'%{idp.authn.LDAP.baseDN:undefined}'.trim()}" p:subtreeSearch="%{idp.authn.LDAP.subtreeSearch:false}" p:connectionFactory-ref="anonSearchPooledConnectionFactory" > <constructor-arg index="0" ref="shibboleth.VelocityEngine" /> <constructor-arg index="1" value="#{'%{idp.authn.LDAP.userFilter:undefined}'.trim()}" /> </bean> <bean id="anonSearchPooledConnectionFactory" class="org.ldaptive.pool.PooledConnectionFactory" p:connectionPool-ref="anonSearchConnectionPool" /> <bean id="anonSearchConnectionPool" class="org.ldaptive.pool.BlockingConnectionPool" parent="connectionPool" p:connectionFactory-ref="anonSearchConnectionFactory" p:name="search-pool" /> <bean id="anonSearchConnectionFactory" class="org.ldaptive.DefaultConnectionFactory" p:connectionConfig-ref="anonSearchConnectionConfig" /> <bean id="anonSearchConnectionConfig" parent="connectionConfig" /> <bean name="aggregateAuthenticator" class="org.ldaptive.auth.Authenticator"> <constructor-arg index="0" ref="aggregateDnResolver" /> <constructor-arg index="1" ref="aggregateAuthHandler" /> </bean> <bean id="aggregateDnResolver" class="org.ldaptive.auth.AggregateDnResolver"> <constructor-arg index="0" ref="dnResolvers" /> </bean> <bean id="aggregateAuthHandler" class="org.ldaptive.auth.AggregateDnResolver$AuthenticationHandler" p:authenticationHandlers-ref="authHandlers" /> <util:map id="dnResolvers"> <entry key="filter1" value-ref="dnResolver1" /> <entry key="filter2" value-ref="dnResolver2" /> </util:map> <!-- Define two DN resolvers that use anonymous search against the same directory --> <bean id="dnResolver1" class="org.ldaptive.auth.PooledSearchDnResolver" p:baseDn="%{idp.authn.LDAP.baseDN1}" p:subtreeSearch="%{idp.authn.LDAP.subtreeSearch:false}" p:userFilter="%{idp.authn.LDAP.userFilter1}" p:connectionFactory-ref="anonSearchPooledConnectionFactory" /> <bean id="dnResolver2" class="org.ldaptive.auth.PooledSearchDnResolver" p:baseDn="%{idp.authn.LDAP.baseDN2}" p:subtreeSearch="%{idp.authn.LDAP.subtreeSearch:false}" p:userFilter="%{idp.authn.LDAP.userFilter2}" p:connectionFactory-ref="anonSearchPooledConnectionFactory" /> <!-- Use the same authentication handler for both DN resolvers --> <util:map id="authHandlers"> <entry key="filter1" value-ref="authHandler" /> <entry key="filter2" value-ref="authHandler" /> </util:map>
Add the idp.authn.LDAP.baseDN[12] and idp.authn.LDAP.userFilter[12] properties to conf/ldap.properties. The key values used in dnResolvers and authHandlers can be anything, but must tie a single DN resolver to a single auth handler. By default an error will occur if more than (1) DN is resolved.
In addition to these beans, the aggregateAuthenticator bean (in the example above) must be injected into the LDAP credential validator in password-authn-config.xml:
<util:list id="shibboleth.authn.Password.Validators"> <!-- Default bean uses the settings defined in ldap.properties --> <bean parent="shibboleth.LDAPValidator" p:authenticator-ref="aggregateAuthenticator" /> </util:list>
Multiple Directories
Aggregate DN Resolver
This authenticator combines the results of multiple DN resolvers that connect to multiple directories.
Spring Configuration
<bean name="aggregateAuthenticator" class="org.ldaptive.auth.Authenticator"> <constructor-arg index="0" ref="aggregateDnResolver" /> <constructor-arg index="1" ref="aggregateAuthHandler" /> </bean> <bean id="aggregateDnResolver" class="org.ldaptive.auth.AggregateDnResolver"> <constructor-arg index="0" ref="dnResolvers" /> </bean> <bean id="aggregateAuthHandler" class="org.ldaptive.auth.AggregateDnResolver$AuthenticationHandler" p:authenticationHandlers-ref="authHandlers" /> <util:map id="dnResolvers"> <entry key="directory1" value-ref="dnResolver1" /> <entry key="directory2" value-ref="dnResolver2" /> </util:map> <util:map id="authHandlers"> <entry key="directory1" value-ref="authHandler1" /> <entry key="directory2" value-ref="authHandler2" /> </util:map> <!-- define DN resolvers and authentication handlers for each directory... -->
Complete example with DN resolvers and authentication handlers for bindSearch
<!-- Properties: - idp.authn.LDAP.authenticator = aggregateAuthenticator - idp.authn.LDAP.ldapURL1 - idp.authn.LDAP.ldapURL2 - idp.authn.LDAP.baseDN1 - idp.authn.LDAP.baseDN2 - idp.authn.LDAP.userFilter1 - idp.authn.LDAP.userFilter2 - idp.authn.LDAP.bindDN1 - idp.authn.LDAP.bindDN2 - idp.authn.LDAP.bindDNCredential1 - idp.authn.LDAP.bindDNCredential2 --> <bean id="aggregateAuthenticator" class="org.ldaptive.auth.Authenticator" c:resolver-ref="aggregateDnResolver" c:handler-ref="aggregateAuthHandler" /> <!-- Aggregate DN resolution --> <bean id="aggregateDnResolver" class="org.ldaptive.auth.AggregateDnResolver" c:resolvers-ref="dnResolvers" p:allowMultipleDns="true" /> <util:map id="dnResolvers"> <entry key="directory1" value-ref="bindSearchDnResolver1" /> <entry key="directory2" value-ref="bindSearchDnResolver2" /> </util:map> <!-- DN resolver 1 --> <bean id="bindSearchDnResolver1" class="org.ldaptive.auth.PooledSearchDnResolver" p:baseDn="#{'%{idp.authn.LDAP.baseDN1:undefined}'.trim()}" p:subtreeSearch="%{idp.authn.LDAP.subtreeSearch:false}" p:userFilter="#{'%{idp.authn.LDAP.userFilter1:undefined}'.trim()}" p:connectionFactory-ref="bindSearchPooledConnectionFactory" /> <bean id="bindSearchPooledConnectionFactory1" class="org.ldaptive.pool.PooledConnectionFactory" p:connectionPool-ref="bindSearchConnectionPool1" /> <bean id="bindSearchConnectionPool1" class="org.ldaptive.pool.BlockingConnectionPool" parent="connectionPool" p:connectionFactory-ref="bindSearchConnectionFactory1" p:name="search-pool1" /> <bean id="bindSearchConnectionFactory1" class="org.ldaptive.DefaultConnectionFactory" p:connectionConfig-ref="bindSearchConnectionConfig1" /> <bean id="bindSearchConnectionConfig1" parent="connectionConfig" p:connectionInitializer-ref="bindConnectionInitializer1" p:ldapUrl="%{idp.authn.LDAP.ldapURL1}" /> <bean id="bindConnectionInitializer1" class="org.ldaptive.BindConnectionInitializer" p:bindDn="#{'%{idp.authn.LDAP.bindDN1:undefined}'.trim()}"> <property name="bindCredential"> <bean class="org.ldaptive.Credential" c:password="%{idp.authn.LDAP.bindDNCredential1:undefined}" /> </property> </bean> <!-- DN resolver 2 --> <bean id="bindSearchDnResolver2" class="org.ldaptive.auth.PooledSearchDnResolver" p:baseDn="#{'%{idp.authn.LDAP.baseDN2:undefined}'.trim()}" p:subtreeSearch="%{idp.authn.LDAP.subtreeSearch:false}" p:userFilter="#{'%{idp.authn.LDAP.userFilter2:undefined}'.trim()}" p:connectionFactory-ref="bindSearchPooledConnectionFactory" /> <bean id="bindSearchPooledConnectionFactory2" class="org.ldaptive.pool.PooledConnectionFactory" p:connectionPool-ref="bindSearchConnectionPool2" /> <bean id="bindSearchConnectionPool2" class="org.ldaptive.pool.BlockingConnectionPool" parent="connectionPool" p:connectionFactory-ref="bindSearchConnectionFactory2" p:name="search-pool2" /> <bean id="bindSearchConnectionFactory2" class="org.ldaptive.DefaultConnectionFactory" p:connectionConfig-ref="bindSearchConnectionConfig2" /> <bean id="bindSearchConnectionConfig2" parent="connectionConfig" p:connectionInitializer-ref="bindConnectionInitializer2" p:ldapUrl="%{idp.authn.LDAP.ldapURL2}" /> <bean id="bindConnectionInitializer2" class="org.ldaptive.BindConnectionInitializer" p:bindDn="#{'%{idp.authn.LDAP.bindDN2:undefined}'.trim()}"> <property name="bindCredential"> <bean class="org.ldaptive.Credential" c:password="%{idp.authn.LDAP.bindDNCredential2:undefined}" /> </property> </bean> <!-- Aggregate authentication --> <bean id="aggregateAuthHandler" class="org.ldaptive.auth.AggregateDnResolver$AuthenticationHandler" p:authenticationHandlers-ref="authHandlers" /> <util:map id="authHandlers"> <entry key="directory1" value-ref="authHandler1" /> <entry key="directory2" value-ref="authHandler2" /> </util:map> <!-- Authentication handler 1 --> <bean id="authHandler1" class="org.ldaptive.auth.PooledBindAuthenticationHandler" p:connectionFactory-ref="bindPooledConnectionFactory1" /> <bean id="bindPooledConnectionFactory1" class="org.ldaptive.pool.PooledConnectionFactory" p:connectionPool-ref="bindConnectionPool1" /> <bean id="bindConnectionPool1" class="org.ldaptive.pool.BlockingConnectionPool" parent="connectionPool" p:connectionFactory-ref="bindConnectionFactory1" p:name="bind-pool1" /> <bean id="bindConnectionFactory1" class="org.ldaptive.DefaultConnectionFactory" p:connectionConfig-ref="bindConnectionConfig1" /> <bean id="bindConnectionConfig1" parent="connectionConfig" p:ldapUrl="%{idp.authn.LDAP.ldapURL1}" /> <!-- Authentication handler 2 --> <bean id="authHandler2" class="org.ldaptive.auth.PooledBindAuthenticationHandler" p:connectionFactory-ref="bindPooledConnectionFactory2" /> <bean id="bindPooledConnectionFactory2" class="org.ldaptive.pool.PooledConnectionFactory" p:connectionPool-ref="bindConnectionPool2" /> <bean id="bindConnectionPool2" class="org.ldaptive.pool.BlockingConnectionPool" parent="connectionPool" p:connectionFactory-ref="bindConnectionFactory2" p:name="bind-pool2" /> <bean id="bindConnectionFactory2" class="org.ldaptive.DefaultConnectionFactory" p:connectionConfig-ref="bindConnectionConfig2" /> <bean id="bindConnectionConfig2" parent="connectionConfig" p:ldapUrl="%{idp.authn.LDAP.ldapURL2}" />
DN resolvers are invoked asynchronously, so all resolvers will be used for each authentication request.
The ldaptive LDAP library has the ability to extract detailed account status information from the directory during authentication. According to the Ldaptive documentation, no standard for exposing account state data has been universally adopted by LDAP vendors, but the library uses a handler which encapsulates account state information. This state contains Warning and Error types that are common to the most popular policy implementations.
Password Policy Control
The Password Policy for LDAP Directories (draft) standard is implemented by several LDAP directories, including OpenLDAP and Oracle DSEE. The Password Policy Control is used during an LDAP bind operation to request information about the user's account state.
To enable the Password Policy Control handlers in ldaptive, add the following to conf/ldap.properties:
conf/ldap.properties
# Use password policy control idp.authn.LDAP.usePasswordPolicy = true
The user will be informed on the login page if there are any Password Policy warnings or errors (messages can be customized in messages/messages.properties).
Password expiration warnings have been confirmed to work with Oracle DSEE. Please notify us or edit this page if you test successfully with other directory products.
Locked Accounts
To inform the user of a locked account, some configuration is needed to detect the error code returned by the LDAP bind request.
In authn/password-authn-config.xml, add an entry to the message clasification rules defined by shibboleth.authn.Password.ClassifiedMessageMap
password-authn-config.xml
<entry key="AccountLocked"> <list> <value>ACCOUNT_LOCKED</value> </list> </entry>
This maps the error code to a AccountLocked event. It will run the empty user flow authn/conditions/account-locked and then pass control back to the form. With this configuration, the user gets the message "Your account is locked".
Debug information
Details of the AuthenticationResponse received, including the password policy controls, can be viewed using the TRACE log level in the logger of name "net.shibboleth.idp" (edit logback.xml).
Active Directory Configuration
The system comes with definitions to configure Active Directory authentication response handlers against a single directory.
Active Directory does not fully support extensible match rules (https://msdn.microsoft.com/en-us/library/cc223241.aspx).
Active Directory (by default) does not support anonymous queries (https://technet.microsoft.com/en-us/library/Cc755809%28v=WS.10%29.aspx).
Using an entry resolver to generate password expiration warnings
Spring Configuration
<!-- authenticator with entry resolver--> <bean id="adAuthenticator" class="org.ldaptive.auth.Authenticator" p:entryResolver-ref="bindSearchEntryResolver" p:authenticationResponseHandlers-ref="authenticationResponseHandler" p:resolveEntryOnFailure="false"> <constructor-arg index="0" ref="formatDnResolver" /> <constructor-arg index="1" ref="authHandler" /> </bean> <!-- authentication response handler that defines a password expiration period and warning period --> <!-- expiration period is the amount of time since a password was set that it will expire in period notation --> <!-- expiration period is only used if the msDS-UserPasswordExpiryTimeComputed attributes cannot be read and pwdLastSet can be read --> <!-- warning period is the amount of time before expiration to produce a warning in period notation. Warning period is only applied if an expiration period can be resolved. --> <!-- note that this response handler has a default constructor without these properties if you don't want to override the defaults --> <bean id="authenticationResponseHandler" class="org.ldaptive.auth.ext.ActiveDirectoryAuthenticationResponseHandler" > <constructor-arg index="0"> <bean factory-method="parse" class="java.time.Period"> <constructor-arg value="%{idp.authn.LDAP.expirationPeriod}" /> </bean> </constructor-arg> <constructor-arg index="1"> <bean factory-method="parse" class="java.time.Period"> <constructor-arg value="%{idp.authn.LDAP.warningPeriod}" /> </bean> </constructor-arg> </bean> <!-- Add an entry resolver to read the pwdLastSet, must be included in idp.authn.LDAP.returnAttributes --> <bean id="bindSearchEntryResolver" class="org.ldaptive.auth.PooledSearchEntryResolver" p:connectionFactory-ref="entryResolverPooledConnectionFactory" /> <bean id="entryResolverPooledConnectionFactory" class="org.ldaptive.pool.PooledConnectionFactory" p:connectionPool-ref="entryResolverConnectionPool" /> <bean id="entryResolverConnectionPool" class="org.ldaptive.pool.BlockingConnectionPool" parent="connectionPool" p:connectionFactory-ref="entryResolverConnectionFactory" p:name="entry-resolver-pool" /> <bean id="entryResolverConnectionFactory" class="org.ldaptive.DefaultConnectionFactory" p:connectionConfig-ref="entryResolverConnectionConfig" /> <bean id="entryResolverConnectionConfig" parent="connectionConfig" p:connectionInitializer-ref="entryResolverConnectionInitializer" /> <bean id="entryResolverConnectionInitializer" class="org.ldaptive.BindConnectionInitializer" p:bindDn="%{idp.authn.LDAP.entryResolver.bindDN}"> <property name="bindCredential"> <bean class="org.ldaptive.Credential"> <constructor-arg value="%{idp.authn.LDAP.entryResolver.bindDNCredential}" /> </bean> </property> </bean>
Example for two Active Directories with two DN Resolvers for each
This example uses directed BaseDN's with LDAP filters, and binds the queries.
Spring Configuration
<!-- Define Directory1 connection pool --> <bean id="adConnectionPool1" class="org.ldaptive.pool.BlockingConnectionPool" abstract="true" p:blockWaitTime="%{idp.pool.LDAP.blockWaitTime:PT3S}" p:poolConfig-ref="adPoolConfig1" p:pruneStrategy-ref="adPruneStrategy1" p:validator-ref="adSearchValidator1" p:failFastInitialize="%{idp.pool.LDAP.failFastInitialize:false}" /> <bean id="adPoolConfig1" class="org.ldaptive.pool.PoolConfig" p:minPoolSize="%{idp.pool.LDAP.minSize:3}" p:maxPoolSize="%{idp.pool.LDAP.maxSize:10}" p:validateOnCheckOut="%{idp.pool.LDAP.validateOnCheckout:false}" p:validatePeriodically="%{idp.pool.LDAP.validatePeriodically:true}" p:validatePeriod="%{idp.pool.LDAP.validatePeriod:PT5M}" /> <bean id="adPruneStrategy1" class="org.ldaptive.pool.IdlePruneStrategy" p:prunePeriod="%{idp.pool.LDAP.prunePeriod:PT5M}" p:idleTime="%{idp.pool.LDAP.idleTime:PT10M}" /> <bean id="adSearchValidator1" class="org.ldaptive.pool.SearchValidator" /> <!-- Directory1 connection pool settings --> <bean id="adConnectionConfig1" class="org.ldaptive.ConnectionConfig" abstract="true" p:ldapUrl="%{idp.authn.LDAP.ldapURL1}" p:useStartTLS="%{idp.authn.LDAP.useStartTLS1:true}" p:connectTimeout="%{idp.authn.LDAP.connectTimeout1:PT3S}" p:sslConfig-ref="adSslConfig1" /> <alias name="%{idp.authn.LDAP.sslConfig:certificateTrust}" alias="adSslConfig1" /> <!-- Define Directory2 connection pool --> <bean id="adConnectionPool2" class="org.ldaptive.pool.BlockingConnectionPool" abstract="true" p:blockWaitTime="%{idp.pool.LDAP.blockWaitTime:PT3S}" p:poolConfig-ref="adPoolConfig2" p:pruneStrategy-ref="adPruneStrategy2" p:validator-ref="adSearchValidator2" p:failFastInitialize="%{idp.pool.LDAP.failFastInitialize:false}" /> <bean id="adPoolConfig2" class="org.ldaptive.pool.PoolConfig" p:minPoolSize="%{idp.pool.LDAP.minSize:3}" p:maxPoolSize="%{idp.pool.LDAP.maxSize:10}" p:validateOnCheckOut="%{idp.pool.LDAP.validateOnCheckout:false}" p:validatePeriodically="%{idp.pool.LDAP.validatePeriodically:true}" p:validatePeriod="%{idp.pool.LDAP.validatePeriod:PT5M}" /> <bean id="adPruneStrategy2" class="org.ldaptive.pool.IdlePruneStrategy" p:prunePeriod="%{idp.pool.LDAP.prunePeriod:PT5M}" p:idleTime="%{idp.pool.LDAP.idleTime:PT10M}" /> <bean id="adSearchValidator2" class="org.ldaptive.pool.SearchValidator" /> <!-- Directory2 connection pool settings --> <bean id="adConnectionConfig2" class="org.ldaptive.ConnectionConfig" abstract="true" p:ldapUrl="%{idp.authn.LDAP.ldapURL3}" p:useStartTLS="%{idp.authn.LDAP.useStartTLS3:true}" p:connectTimeout="%{idp.authn.LDAP.connectTimeout3:PT3S}" p:sslConfig-ref="adSslConfig2" /> <alias name="%{idp.authn.LDAP.sslConfig:certificateTrust}" alias="adSslConfig2" /> <!-- ldap.properties "idp.authn.LDAP.authenticator = adAggregateAuthenticator" --> <bean id="adAggregateAuthenticator" class="org.ldaptive.auth.Authenticator" p:authenticationResponseHandlers-ref="adAuthenticationResponseHandler"> <constructor-arg index="0" ref="adAggregateDnResolver" /> <constructor-arg index="1" ref="adAggregateAuthHandler" /> </bean> <bean id="adAuthenticationResponseHandler" class="org.ldaptive.auth.ext.ActiveDirectoryAuthenticationResponseHandler" /> <bean id="adAggregateDnResolver" class="org.ldaptive.auth.AggregateDnResolver"> <constructor-arg index="0" ref="adDnResolvers" /> </bean> <bean id="adAggregateAuthHandler" class="org.ldaptive.auth.AggregateDnResolver$AuthenticationHandler" p:authenticationHandlers-ref="adAuthHandlers" /> <util:map id="adDnResolvers"> <entry key="directory1_filter1" value-ref="adDnResolver1" /> <entry key="directory1_filter2" value-ref="adDnResolver2" /> <entry key="directory2_filter3" value-ref="adDnResolver3" /> <entry key="directory2_filter4" value-ref="adDnResolver4" /> </util:map> <!-- Define two DN resolvers that use bind search against the Directory1 directory --> <bean id="adDnResolver1" class="org.ldaptive.auth.PooledSearchDnResolver" p:baseDn="%{idp.authn.LDAP.baseDN1}" p:subtreeSearch="%{idp.authn.LDAP.subtreeSearch1:false}" p:userFilter="%{idp.authn.LDAP.userFilter1}" p:connectionFactory-ref="adBindSearchPooledConnectionFactory1" /> <bean id="adDnResolver2" class="org.ldaptive.auth.PooledSearchDnResolver" p:baseDn="%{idp.authn.LDAP.baseDN2}" p:subtreeSearch="%{idp.authn.LDAP.subtreeSearch2:false}" p:userFilter="%{idp.authn.LDAP.userFilter2}" p:connectionFactory-ref="adBindSearchPooledConnectionFactory1" /> <!-- Define two DN resolvers that use bind search against the Directory2 directory --> <bean id="adDnResolver3" class="org.ldaptive.auth.PooledSearchDnResolver" p:baseDn="%{idp.authn.LDAP.baseDN3}" p:subtreeSearch="%{idp.authn.LDAP.subtreeSearch3:false}" p:userFilter="%{idp.authn.LDAP.userFilter3}" p:connectionFactory-ref="adBindSearchPooledConnectionFactory2" /> <bean id="adDnResolver4" class="org.ldaptive.auth.PooledSearchDnResolver" p:baseDn="%{idp.authn.LDAP.baseDN4}" p:subtreeSearch="%{idp.authn.LDAP.subtreeSearch4:false}" p:userFilter="%{idp.authn.LDAP.userFilter4}" p:connectionFactory-ref="adBindSearchPooledConnectionFactory2" /> <!-- Define Directory1 Search-pool --> <bean id="adBindSearchPooledConnectionFactory1" class="org.ldaptive.pool.PooledConnectionFactory" p:connectionPool-ref="adBindSearchConnectionPool1" /> <bean id="adBindSearchConnectionPool1" class="org.ldaptive.pool.BlockingConnectionPool" parent="adConnectionPool1" p:connectionFactory-ref="adBindSearchConnectionFactory1" p:name="adSearch-pool1" /> <bean id="adBindSearchConnectionFactory1" class="org.ldaptive.DefaultConnectionFactory" p:connectionConfig-ref="adBindSearchConnectionConfig1" /> <bean id="adBindSearchConnectionConfig1" parent="adConnectionConfig1" p:connectionInitializer-ref="adBindConnectionInitializer1" /> <bean id="adBindConnectionInitializer1" class="org.ldaptive.BindConnectionInitializer" p:bindDn="%{idp.authn.LDAP.bindDN1}"> <property name="bindCredential"> <bean class="org.ldaptive.Credential"> <constructor-arg value="%{idp.authn.LDAP.bindDNCredential1}" /> </bean> </property> </bean> <!-- Define Directory2 Search-pool --> <bean id="adBindSearchPooledConnectionFactory2" class="org.ldaptive.pool.PooledConnectionFactory" p:connectionPool-ref="adBindSearchConnectionPool2" /> <bean id="adBindSearchConnectionPool2" class="org.ldaptive.pool.BlockingConnectionPool" parent="adConnectionPool2" p:connectionFactory-ref="adBindSearchConnectionFactory2" p:name="adSearch-pool2" /> <bean id="adBindSearchConnectionFactory2" class="org.ldaptive.DefaultConnectionFactory" p:connectionConfig-ref="adBindSearchConnectionConfig2" /> <bean id="adBindSearchConnectionConfig2" parent="adConnectionConfig2" p:connectionInitializer-ref="adBindConnectionInitializer2" /> <bean id="adBindConnectionInitializer2" class="org.ldaptive.BindConnectionInitializer" p:bindDn="%{idp.authn.LDAP.bindDN3}"> <property name="bindCredential"> <bean class="org.ldaptive.Credential"> <constructor-arg value="%{idp.authn.LDAP.bindDNCredential3}" /> </bean> </property> </bean> <util:map id="adAuthHandlers"> <entry key="directory1_filter1" value-ref="adAuthHandler1" /> <entry key="directory1_filter2" value-ref="adAuthHandler1" /> <entry key="directory2_filter3" value-ref="adAuthHandler2" /> <entry key="directory2_filter4" value-ref="adAuthHandler2" /> </util:map> <!-- Use the same authentication handler for both Directory1 DN resolvers --> <bean id="adAuthHandler1" class="org.ldaptive.auth.PooledBindAuthenticationHandler" p:connectionFactory-ref="adBindPooledConnectionFactory1" /> <bean id="adBindPooledConnectionFactory1" class="org.ldaptive.pool.PooledConnectionFactory" p:connectionPool-ref="adBindConnectionPool1" /> <bean id="adBindConnectionPool1" class="org.ldaptive.pool.BlockingConnectionPool" parent="adConnectionPool1" p:connectionFactory-ref="adBindConnectionFactory1" p:name="adBind-pool1" /> <bean id="adBindConnectionFactory1" class="org.ldaptive.DefaultConnectionFactory" p:connectionConfig-ref="adBindConnectionConfig1" /> <bean id="adBindConnectionConfig1" parent="adConnectionConfig1" /> <!-- Use the same authentication handler for both Directory2 DN resolvers --> <bean id="adAuthHandler2" class="org.ldaptive.auth.PooledBindAuthenticationHandler" p:connectionFactory-ref="adBindPooledConnectionFactory2" /> <bean id="adBindPooledConnectionFactory2" class="org.ldaptive.pool.PooledConnectionFactory" p:connectionPool-ref="adBindConnectionPool2" /> <bean id="adBindConnectionPool2" class="org.ldaptive.pool.BlockingConnectionPool" parent="adConnectionPool2" p:connectionFactory-ref="adBindConnectionFactory2" p:name="adBind-pool2" /> <bean id="adBindConnectionFactory2" class="org.ldaptive.DefaultConnectionFactory" p:connectionConfig-ref="adBindConnectionConfig2" /> <bean id="adBindConnectionConfig2" parent="adConnectionConfig2" />
Add missing Active Directory account state errors
If adAuthenticator is the authenticator set in the idp.authn.LDAP.authenticator property, Short Description values are contained in the response. If bindSearchAuthenticator is the authenticator set in the idp.authn.LDAP.authenticator property, HEX values are contained in the response. It is possible to use either or both as outlined in the following example. (http://ldapwiki.willeke.com/wiki/Common%20Active%20Directory%20Bind%20Errors)
password-authn-config.xml
... <entry key="AccountDisabled"> <list> <value>ACCOUNT_DISABLED</value> <value>533</value> </list> </entry> <entry key="AccountExpired"> <list> <value>ACCOUNT_EXPIRED</value> </list> </entry> <entry key="AccountLocked"> <list> <value>ACCOUNT_LOCKED_OUT</value> <value>775</value> </list> </entry> <entry key="ChangePassword"> <list> <value>PASSWORD_EXPIRED</value> <value>PASSWORD_MUST_CHANGE</value> <value>532</value> </list> </entry> ...
messages/messages.properties
... AccountDisabled = account-disabled AccountExpired = account-expired AccountLocked = account-locked ChangePassword = change-password account-disabled.message = Your account is disabled. account-expired.message = Your account has expired. account-locked.message = Your account is locked. change-password.message = You must change your password before authenticating here. ...
- No labels