Windows Installation
The native Shibboleth SP is available for Windows with modules for all the supported web servers. There is an installer available for supported Windows versions:
- Windows XP SP2 and Later
- Windows 2003 Server SP1 and Later
- Windows 2008 Server
Earlier Windows and Service Pack versions are not supported as of V2.4. Since earlier versions of the SP are no longer safe to use due to security issues, we do not recommend using them to obtain compatibility with older Windows versions.
Prior to V2.5, it is recommended that you install the software to C:\opt\shibboleth-sp if possible. The installer may not default to this drive letter.
The installer does not work fully in conjunction with the IIS "Shared Configuration" option available on newer releases of IIS. Disable it prior to installation. After re-enabling it, you will likely have to manually apply some of the configuration changes; refer to the appropriate topic below.
As of V2.5, the Windows installation has been revamped significantly to support enhanced operation and ease of patching and upgrades:
- You may now install the SP to any location you wish, rather than being forced to use C:\opt\shibboleth-sp (though this is still recommended for consistency).
- Most shared components are now installed to Program Files\Shibboleth and ProgramData\Shibboleth. Most files deployers are familiar with remain in the same relative locations, so these changes should be mostly invisible to you.
- The 64-bit install now contains both 32-bit and 64-bit binaries and you can switch architectures after installation (but not run both at the same time). When using a 64-bit OS, you MUST use the 64-bit installer now; the 32-bit installer will refuse to run to ensure this.
- There will no longer be any post-installation ZIP package for upgrades or patches. New installation packages will be used for all patching and upgrades.
Note that as with older releases, if you want the installer to attempt IIS configuration for you when using IIS 7.x, the IIS 6 management compatibility feature must be installed.
Install for IIS 5
Install for IIS 6
Install for IIS 7
Install for Apache
It's also possible (though not simple) to build the SP and its dependencies from source using Visual Studio, but this should only be attempted by experienced Windows developers.
Shibboleth Service
Once installation is complete, you'll need to run the Shibboleth daemon, shibd
, at all times. shibd
is a console application that is usually installed as a Windows service.
- To run the process in console mode for testing or to diagnose major problems, supply a
-console
parameter when running it. - If
shibd
won't start, use the-check
option from the command line to echo most logging information to the console for debugging.
Other parameters can be used to install (or remove) shibd
from the service database and subsequent control is generally via the Service Control Manager applet.
Monitoring the Service
Newer versions of Windows support automatic restart of failed services. We suggest using this feature to restart shibd when it fails. Although stability is good, maximum reliability will be achieved by monitoring the process.
Initial Testing
You can test to ensure that the SP is running properly and the surrounding environment is correct by accessing https://localhost/Shibboleth.sso/Status from the actual web server machine. You MUST use "localhost" as the hostname or it WILL NOT WORK by default. If this test is successful, then the software is ready for further configuration.
You can also access the Status handler from other clients or using a non-localhost name, but only if you change the acl
parameter in the configuration to permit your client address or remove it entirely to open up access to anybody. The ACL is present by default because the Status handler can return some arguably sensitive information about your configuration.
Now you can progress to the Getting Started material, or if you're in the very early stages of evaluation, try a more controlled scenario by using the TestShib IdP. (Note that before using the TestShib IdP, you'll need to complete the first step from Getting Started, setting the entityID attribute in the ApplicationDefaults element of shibboleth2.xml.)
Once you've actually configured the SP with its own settings and metadata from at least one IdP, in order to check that the SP is "working":
- Protect a directory by requiring a Shibboleth session. Usually, this is already done by default for the location "/secure".
Next, you typically place a script inside the protected directory that dumps the web server environment. With PHP for example you could in the easiest case just place a script there with the following:
<?php print_r($_SERVER) ?>
A more advanced version of such a script can be found here.
- Make sure that the Shibboleth-supplied variables are present. If there is a non-empty variable called Shib-Application-ID, you successfully authenticated and have a valid session. However, you also should check if there are other non-empty Shibboleth variables defined in the attribute-map.xml file. If there are no variables like mail or givenName or surname, the IdP either releaseed no attributes, or the attribute request failed (the latter usually only applies when using an older IdP). In this case, have a look at the
shibd.log
file.